Eidgenössisches Departement für Verteidigung, Bevölkerungsschutz und Sport VBS armasuisse Bundesamt für Landestopografie swisstopo Seftigenstrasse 264, CH-3084 Wabern Tel. +41 31 963 21 11, Fax +41 31 963 24 59
[email protected], www.swisstopo.ch
Installation guide „Swiss Map Mobile 2009 - Symbian S60 Edition“ for Nokia mobile phones
Preconditions • •
Successful purchase transaction of the section in toposhop. The installer which has been provided by toposhop with a link is downloaded and executed (the map data and the application are copied onto the mobile phone).
In order to use the application „Swiss Map Mobile 2009 - Symbian S60 Edition“ with your Nokia mobile phone, it must be installed now. In this document, we provide a Step-by-Step guidance. Please note that your mobile phone may have another menu guidance and layout, which is not covered by this installation guide. Therefore we refer to the corresponding explanations in the manual of your mobile phone.
Important:
20100401/KIK
The installation of the application is distinguished between the Nokia mobile phones of the 4-digit-figure-series (e.g. 6210 navigator) and the Nokia mobile phones of the N-series (e.g. N82).
Installation guide „Swiss Map Mobile 2009 - Symbian S60 Edition“ - Nokia
1/3
4-digit-figure-series (e.g. 6210 Navigator) 1.
Installation of the certificate • • • • • •
2.
Installation of the software • • • • • • • •
3.
Select „Menu“ -> „Office“ -> „File manager“ Select the „Memory Card“ and press „Open“ Select and open the file „swiss_map_mobile_2009_symbian_s60.jar“ (the type of the file – „jar“ or „jad“ - is indicated under „Options“ -> „Details“ -> „File“) With the question „Install Swiss Map Mobile 2009?“ press „Yes“ With the mask „Details“ select „Continue“ With the mask „Install to“ select „Phone memory“ Caution! After the installation has been completed, press „Close“. Do not start the application at this time! Press the red key to return to the main view
Settings of the certificate • • • • • • • • •
4.
Select „Menu“ -> „Office“ -> „File manager“ Select the „Memory Card“ and press „Open“ Select the file „VeriSign Class 3 Code Signing 2009-2 ca.cer“ and press „Open“ With the question „Save certificate“ press „Save“ With the question „New certificate might be unsecure. Save anyway?“ press „Save“ Press the red key to return to the main view
Select „Menu“ Open „Settings“ -> „Data manager“ -> „Application manager“ -> „Installed applications“ Mark now with the cursor the application „Swiss Map Mobile“ Select „Settings“ Search the following setting points by scrolling with the cursor: With the setting point „Read user data“ press „Change“ and select -> „Always allowed“, confirm with „OK“ With the setting point „Edit user data“ press „Change“ and select -> „Always allowed“, confirm with „OK“ With the setting point „Positioning“ press „Change“ and select -> „Always allowed“, confirm with „OK“ Press the red key to return to the main view
Where do I find/start the application? • •
Select „Menu“ -> „Applications“ -> „My own“ Start the application „Swiss Map Mobile 2009“ by pressing „Open“
20100401/KIK
Installation guide „Swiss Map Mobile 2009 - Symbian S60 Edition“ - Nokia
2/3
N-series (e.g. N82) 1.
Installation of the certificate • • • • • • •
2.
Installation of the software • • • • • • • • •
3.
Open the main menu by pressing the main menu key Select „Tools“ -> „File manager“ Click with the cursor to the right (the content of the memory card is shown) Select the JAR-file „swiss_map_mobile_2009_symbian_s60“ (it’s the second file in the list. The type of the file – „jar“ or „jad“ - is indicated under „Options“ -> „View details“) When you have highlighted the correct file with the cursor -> „swiss_map_mobile_2009_symbian_s60.jar“, press „Options“ -> „Open“ With the question „Install Swiss Map Mobile 2009?“ select „Yes“ With the mask „Details“ select „Continue“ With the mask „Install to“ select „Phone memory“ After the installation select „Exit“
Settings of the certificate • • • • • • • • •
4.
Open the main menu by pressing the main menu key Select „Tools“ -> „File manager“ Click with the cursor to the right (the content of the memory card is shown) Highlight with the cursor the file „Verisign class 3 code signing 2009-2 ca.cer“ Select „Options“ -> „Open“ -> and „Save“ the certificate With the question „New certificate might be unsecure. Save anyway?“ press „Save“ After the installation press „Exit“
Open the main menu by pressing the main menu key Select „Applications“ and afterwards -> „Application manager“ Highlight with the cursor the application „Swiss Map Mobile“ Press „Options“ and select „Open“ Search the following setting points by scrolling with the cursor: With the setting point „Read user data“ press „Options“, select „Change“ and choose -> „Always allowed“, confirm with „OK“ With the setting point „Edit user data“ press „Options“, select „Change“ and choose -> „Always allowed“, confirm with „OK“ With the setting point „Positioning“ press „Options“, select „Change“ and choose -> „Alwa „Swiss Map Mobile 2009“
20100401/KIK
Installation guide „Swiss Map Mobile 2009 - Symbian S60 Edition“ - Nokia
3/3
