Pododent Motor NSK Japan Bearing Replacement

Pododent Motor NSK Japan Bearing Replacement The ball bearings used by NSK are not stainless, although water flows through the handpiece. Therefore they rust easily. Servicing Costs 500 Euro. But replacement is inexpensive and easy.

Written By: Michael

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 2

Pododent Motor NSK Japan Bearing Replacement

Step 1 — ball-bearing 

The illustration shows the individual parts. In handpiece to the motor housing with the right are on the top left above the anchor. Bottom right of the clamp body for the tools and left of the reception of the clamp body.

Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen. This document was last generated on 2017-06-19 06:32:15 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 2