Hamilton Beach 48464 Base Replacement
ID de guía: 60824 - Borrador: 2016-05-10
Hamilton Beach 48464 Base Replacement This guide will show how to properly remove the base. This is important if your base has been cracked or broken in any way or a way to get inside of the coffee maker.
Escrito por: Michael Damico
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 1 de 4
Hamilton Beach 48464 Base Replacement
ID de guía: 60824 - Borrador: 2016-05-10
INTRODUCCIÓN Before starting, you should be sure to unplug the coffee maker. Also, me sure to empty all contents before making any repairs.
HERRAMIENTAS: Crown Bolt #8 Steel Spanner (1) Phillips #2 Screwdriver (1)
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 2 de 4
Hamilton Beach 48464 Base Replacement
ID de guía: 60824 - Borrador: 2016-05-10
Paso 1 — Base
This is what the bottom cover will look like. Flip the Brew Station upside down to easily access the screws.
Paso 2
Using the Philips 2 Screwdriver, unscrew the three 8-mm screws labeled in a red outline.
Using the Crown Bolt #8 Steel Spanner, unscrew the two 8-mm screws labeled in a orange outline.
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 3 de 4
Hamilton Beach 48464 Base Replacement
ID de guía: 60824 - Borrador: 2016-05-10
Paso 3
Carefully slide off the bottom drip tray by sliding it out away from the Brew Station.
Gently lift the base away from the Brew Station.
Paso 4
To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2019-08-20 02:48:13 AM .
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 4 de 4