Audio Technica ATH-AD500 3-D Wings Replacement
ID de guía: 12856 - Borrador: 2014-01-28
Audio Technica ATH-AD500 3-D Wings Replacement If your headphones are not staying on due to damaged 3-D wings, replace the 3-D wings.
Escrito por: Melanie Reis
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 1 de 3
Audio Technica ATH-AD500 3-D Wings Replacement
ID de guía: 12856 - Borrador: 2014-01-28
INTRODUCCIÓN This installation guide will help you replace the 3-D wings.
PARTES: Replacement 3-D wing (1)
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 2 de 3
Audio Technica ATH-AD500 3-D Wings Replacement
ID de guía: 12856 - Borrador: 2014-01-28
Paso 1 — 3-D Wings
Remove the 3-D wing by pushing down on the bar which the wing is connected to while simultaneously pushing up on the wing.
To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2019-08-26 01:02:22 AM .
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 3 de 3