TEU3UA EcoPower® Ultra High-Efficiency Urinal Flush Valve 0.125 gpf FEATURES • • • • • • • • •

0.125 GPF Self-powered hydroelectric flush valve system No minimum daily usage requirement 4” x 4” brushed stainless steel cover plate with solid bronze valve body Neutral rough-in and adjustable tail piece connection Manual flush override Smart sensor with self-adjusting detection range 6-second detection time to prevent ghost flushing ADA compliant

MODELS TEU3UA11#SS • TEU3UA#SS (0.125 gpf flush valve) • VB13RB-11 (3/4" vacuum breaker tube, 3/4" angle stop, back spud) TEU3UA12#SS • TEU3UA#SS (0.125 gpf flush valve) • VB9RB-12 (3/4" vacuum breaker tube, 3/4" angle stop, top spud)

EcoPower Auto Functions

COLORS/FINISHES

PRODUCT SPECIFICATION

• #SS Stainless Steel

TOTO® Model No. _____________________________ Product shall be 0.125 GPF. Product shall be an automatic infrared sensor-activated, urinal flush valve. Product shall use hydropower, EcoPower flush valve system. Product shall have 4" x 4" cover plate with brushed stainless steel finish. Product shall have adjustable tail piece connection. Product shall have neutral rough. Product shall have smart sensor with self-adjusting detection range. Product shall have manual flush override. Product shall have 6-second detection time to prevent ghost flushing. Product shall have solenoid with self-cleaning mechanism. Product shall be ADA compliant.

OPTIONAL ACCESSORIES • Z-4000-J - Adapter for ground joint angle stops

CODES/STANDARDS • Meets or exceeds ASSE 1037, CSA B125.3 • Certifications: IAPMO(cUPC), EPA WaterSense, ASSE, State of Massachusetts, and others • Code Compliance: UPC, IPC, NSPC, NPC Canada, and others • Complies with CA Title 20 regulations and CalGreen when used with a 0.125 gpf wall mount urinal • ADA compliant

TEU3UA EcoPower® Ultra High-Efficiency Urinal Flush Valve 0.125 gpf SPECIFICATIONS

INSTALLATION NOTES

• Material Bronze casting For commercial applications only. • Power supply EcoPower Warning: Failure to properly adjust angle stop to • Sensor detection time Factory setting at six the appropriate level can potentially cause property (6) seconds minimum damage. • Sensor detection range Self-adjusting to environment For detailed installation instructions, please refer to • Discharge quantity Preset to 0.125 gpf/ the installation manual. 0.47 lpf • Operating temperature 32°-104°F (0°-40°C) Max flow rate to be used with • Water supply pressure 15 psi - 125 psi* TEU3UA___________: 0.125 gpf • Water supply connection 3/4" NPT • Warranty Three year limited Confirm with local codes and standards for floor drain requirement. Adjust control stop for proper flow rate *Water pressures over 80 psi are not recommended for most plumbing to the fixture. fixtures. Check your local plumbing code for details.

The recommended installation for the flush valve is to have a 7" (178mm) minimum space in wall with a minimum 12" x 12" access panel or walk-in chase (for service and maintenance purposes). Do not place grab bars in front of sensor for ADA stalls.

DIAGRAM 4-3/4” ± 1/2” (120 ± 13mm) Right water supply pipe

Left water supply pipe 1”NPT (toilet), 3/4” (urinal)

1”NPT (toilet), 3/4” (urinal)

1-1/4” (31 mm)

33-1/2" (850mm )

CL of sensor

** 3-11/16” (94 mm)

15°

Toilet top spud Ø2-3/16” (Ø56 mm) hole Urinal top spud Ø1-5/16” (Ø33mm) hole Urinal back spud Ø1-5/16” (Ø33 mm) hole Toilet back spud Ø2-3/16” (Ø55 mm) hole

Max 19-11/16” (Max 500mm)

16” (406mm)

** 3-11/16” (94mm)

4 x Ø5/16" (Ø8mm) hole

11” (279mm)

X”

3-11/16” (94mm)

4-3/8” (110mm) 3-11/16” (94mm)

4-3/4” 120mm)

4-3/8” (110mm) 3-11/16” (94mm)

1-1/4” (31mm)

4-3/4” (120mm) 3-11/16” (94mm)

* X”, ‡ = At least 5” clearance from sensor to tip of toilet seat up position or to top of grab bar is required to avoid false detection. ** Opening in wall

These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA

#SS-01173, v.01