TEU2LA EcoPower® High-Efficiency Urinal Flush Valve 0.5 gpf FEATURES • • • • • • • • • •
0.5 GPF Self-powered hydroelectric flush valve system No minimum daily usage requirement 14” x 12” stainless steel cover plate with solid bronze valve body Neutral rough-in and adjustable tail piece connection Self-cleaning piston valve with 360° filter screen Manual flush override Smart sensor with self-adjusting detection range 6-second detection time to prevent ghost flushing ADA compliant
MODELS TEU2LA11#SS • TEU2LA#SS (0.5 gpf flush valve) • VB13RB-11 (3/4" vacuum breaker tube, 3/4" angle stop, back spud) TEU2LA12#SS • TEU2LA#SS (0.5 gpf flush valve) • VB9RB-12 (3/4" vacuum breaker tube, 3/4" angle stop, top spud)
EcoPower Auto Functions
TEU2LA21#SS • TEU2LA#SS (0.5 gpf flush valve) • VB13RB-21 (1-1/4" vacuum breaker tube, 3/4" angle stop, back spud)
COLORS/FINISHES Piston Valve
• #SS Stainless Steel
OPTIONAL ACCESSORIES • Z-4000-J - Adapter for ground joint angle stops
CODES/STANDARDS • Meets or exceeds ASSE 1037, CSA B125.3 • Certifications: IAPMO(cUPC), EPA WaterSense, ASSE, State of Massachusetts, and others • Code Compliance: UPC, IPC, NSPC, NPC Canada, and others • Legislative Comliance: California AB715, California Green Building Code and others • ADA compliant
PRODUCT SPECIFICATION TOTO® Model No. _____________________________ Product shall be 0.5 GPF. Product shall be an automatic infrared sensor-activated, urinal flush valve. Product shall use hydropower, EcoPower flush valve system. Product shall have heavy-duty 14" x 12" stainless steel coverplate with satin finish. Product shall have adjustable tail piece connection. Product shall have neutral rough. Product shall have smart sensor with self-adjusting detection range. Product shall have manual flush override. Product shall have 6-second detection time to prevent ghost flushing. Product shall have piston with debris screen and solenoid with selfcleaning mechanism. Product shall be ADA compliant.
TEU2LA EcoPower® High-Efficiency Urinal Flush Valve 0.5 gpf SPECIFICATIONS
INSTALLATION NOTES
• Material Bronze casting For commercial applications only. • Power supply EcoPower Warning: Failure to properly adjust angle stop to • Sensor detection time Factory setting at six the appropriate level can potentially cause property (6) seconds minimum damage. • Sensor detection range Self-adjusting to environment For detailed installation instructions, please refer to • Discharge quantity Preset to 0.5 gpf the installation manual. • Operating temperature 32°-104°F (0°-40°C) • Water supply pressure 15 psi - 125 psi* Max flow rate to be used with • Water supply connection 3/4" NPT TEU2LA___________: 0.5 gpf • Warranty Three year limited Confirm with local codes and standards for floor drain requirement. Adjust control stop for proper flow rate *Water pressures over 80 psi are not recommended for most plumbing to the fixture. fixtures. Check your local plumbing code for details. The recommended installation for the flush valve is to have a 7" (178mm) minimum space in wall. Do not place grab bars in front of sensor for ADA stalls.
DIAGRAM 4-3/4” ± 1/2” (120 ± 13mm)
Left water supply 1” NPT (toilet), 3/4” (urinal)
Right water supply 1” NPT (toilet), 3/4” (urinal)
Sensor Location 3-7/16” (87mm)
CL of sensor ** 11-15/16” (303mm)
* 14-3/4” ‡ from top of fixture (toilet)
33-1/2" (850mm )
11” (279mm)
3/4” (19mm)
** 13-1/2” (343mm)
15° 16” (406mm)
Stud Toilet top spud Ø2-3/16” (Ø56mm) hole Urinal top spud Ø1-1/2” (Ø38mm) hole
* X”
Max 19-11/16” (Max 500mm)
Toilet Back spud Ø2-3/16” (Ø56mm) hole Urinal Back spud Ø1-5/16” (Ø33mm) hole
* X”, ‡ = At least 5” clearance from sensor to tip of toilet seat up position or to top of grab bar is required to avoid false detection. ** Opening in wall 13-3/8” (340mm) 12-5/8” (320mm)
11-7/8” (301mm) 11” (280mm)
12-5/8” (320mm) 11” (280mm)
14-3/16” (360mm) 12-5/8” (320mm)
These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
#SS-01172, v.01
