813
M12 Automatisierungstechnik - Sonder - T-Kodierung M12 Automation Technology - Special - T-Coding Kabelsteckverbinder • Schraubverriegelung nach DIN EN 61076-2-111 • Schutzart IP67 1) • Einfache Montage • Winkelsteckverbinder in 4 Positionen einstellbar
Cable Connectors • Screw locking according to DIN EN 61076-2-111 • Degree of protection IP67 1) • Easy assembly • Angled connector adjustable in 4 positions
Flanschsteckverbinder • Schraubverriegelung nach DIN EN 61076-2-111 • Schutzart IP67 1) • Einfache Montage • Tauchlötanschluss/Litzen • Verschiedene Bauformen
Panel Mount Connectors • Screw locking according to DIN EN 61076-2-111 • Degree of protection IP67 1) • Easy assembly • Dip solder termination/single wires • Various variants
1)
Erläuterung der Schutzarten siehe technische Informationen./ 1) Explanation of protection standards see technical information.
Zubehör am Ende des Kataloges./Accessories at the end of the catalogue.
652
M12-T
Automatisierungstechnik - Sonder - Serie 813 Automation Technology - Special - 813 Series Kabelstecker mit T-Kodierung, Power Male cable connector with T-coding, Power
Winkelstecker mit T-Kodierung, Power Male angled connector with T-coding, Power
Abbildung / Figure
Maßzeichnung / Drawing
SW 19mm Verdrehen des Kontakteinsatzes zum Winkelgang im 90° Raster möglich. It is possible to turn and fix the contact carrier in 4 different 90° positions.
Kabel Ø 8–10 Cable Ø 8–10
~44
Ø 20
Ø 20,2 M12 x 1
SW 18mm
45°
Kabel Ø 8–10 Cable Ø 8–10
~63
SW 19mm
SW 18mm
M12 x 1 Ø 20,2 Bestell-Daten / Order Data Polzahl Contacts
Kabeldurchlass Cable outlet
Bestell-Nr. Ordering-No.
Polzahl Contacts
Kabeldurchlass Cable outlet
Bestell-Nr. Ordering-No.
4
8–10 mm
99 0629 19 04
4
8–10 mm
99 0629 58 04
Technische Daten / Specifications Polzahl Steckverbinder Verriegelung Anschlussart Anschlussquerschnitt Kabeldurchlass Schutzart Mechanische Lebensdauer Obere Grenztemperatur Untere Grenztemperatur Bemessungsspannung Bemessungs-Stoßspannung Verschmutzungsgrad Überspannungskategorie Isolierstoffgruppe Bemessungsstrom (40°C) Durchgangswiderstand Material Kontakt Kontaktoberfläche Material Kontaktkörper Material Gehäuse
653
4 schrauben/screw schraubklemm/screw clamp max. 1,5 mm2 (max. AWG 16) 8–10 mm IP67 > 100 Steckzyklen/> 100 mating cycles + 85 °C – 40 °C 63 V 1500 V 3 IIl lll 12 A ≤ 3 mΩ CuZn (Messing/brass) Au (Gold/gold) PA PA
Number of contacts Connector locking system Termination Wire gauge Cable outlet Degree of protection Mechanical operation Upper temperature Lower temperature Rated voltage Rated impulse voltage Pollution degree Overvoltage categorie Material group Rated current (40 °C) Contact resistance Material of contact Contact plating Material of contact body Material of housing
M12-T
Automatisierungstechnik - Sonder - Serie 813 Automation Technology - Special - 813 Series Kabeldose mit T-Kodierung, Power Female cable connector with T-coding, Power
Winkeldose mit T-Kodierung, Power Female angled connector with T-coding, Power
Abbildung / Figure
Maßzeichnung / Drawing 1
4 3
2
SW 19mm Verdrehen des Kontakteinsatzes zum Winkelgang im 90° Raster möglich. It is possible to turn and fix the contact carrier in 4 different 90° positions.
~39
Ø 20
Ø 20,2 M12 x 1
SW 18mm
45°
Kabel Ø 8–10 Cable Ø 8–10
~58
SW 19mm
Kabel Ø 8–10 Cable Ø 8–10 SW 18mm
M12 x 1 Ø 20,2 Bestell-Daten / Order Data Polzahl Contacts
Kabeldurchlass Cable outlet
Bestell-Nr. Ordering-No.
Polzahl Contacts
Kabeldurchlass Cable outlet
Bestell-Nr. Ordering-No.
4
8–10 mm
99 0630 19 04
4
8–10 mm
99 0630 58 04
Technische Daten / Specifications Polzahl Steckverbinder Verriegelung Anschlussart Anschlussquerschnitt Kabeldurchlass Schutzart Mechanische Lebensdauer Obere Grenztemperatur Untere Grenztemperatur Bemessungsspannung Bemessungs-Stoßspannung Verschmutzungsgrad Überspannungskategorie Isolierstoffgruppe Bemessungsstrom (40°C) Durchgangswiderstand Material Kontakt Kontaktoberfläche Material Kontaktkörper Material Gehäuse
4 schrauben/screw schraubklemm/screw clamp max. 1,5 mm2 (max. AWG 16) 8–10 mm IP67 > 100 Steckzyklen/> 100 mating cycles + 85 °C – 40 °C 63 V 1500 V 3 IIl lll 12 A ≤ 3 mΩ CuSn (Bronze/bronze) Au (Gold/gold) PA PA
Number of contacts Connector locking system Termination Wire gauge Cable outlet Degree of protection Mechanical operation Upper temperature Lower temperature Rated voltage Rated impulse voltage Pollution degree Overvoltage categorie Material group Rated current (40 °C) Contact resistance Material of contact Contact plating Material of contact body Material of housing
654
M12-T
Automatisierungstechnik - Sonder - Serie 813 Automation Technology - Special - 813 Series Montageanleitung Assembly instruction
Abisoliermaße Kabelsteckverbinder, Schraubklemmanschluss, nicht schirmbar Strip measures cable connectors, screw clamp connection, not shieldable
20
teln abman tle disman olieren
5 abis strip
Abisoliermaße Winkelsteckverbinder, Schraubklemmanschluss, nicht schirmbar Strip measures angled connectors, screw clamp connection, not shieldable teln abman e tl disman n re e isoli 5 ab strip
20
Kennlinie Rating
Strombelastbarkeitskurve nach DIN EN 60512 für POWER-Kabelsteckverbinder Derating curve according to DIN EN 60512 for POWER cable connectors
T-Kodierung 4-polig T-coding 4 pole version
655
Belastungsstrom I (A) Load current I (A) 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
obere Grenztemperatur high limit temperature
0
5 10 15 20 25 30 Bauteil-Umgebungstemperatur TU (°C) Ambient temperature of part TU (°C)
35
40
45
50
55
60
65
70
75
80
85
90
95
656
M12-T
Automatisierungstechnik - Sonder - Serie 813 Automation Technology - Special - 813 Series Flanschstecker mit T-Kodierung, Power, Schraubklemmanschluss Male panel mount connector with T-coding, Power, screw clamp connection
Flanschstecker mit T-Kodierung, Power, von vorn verschraubbar, tauchlöten Male panel mount connector with T-coding, Power, front fastened, dip solder
Abbildung / Figure
Maßzeichnung / Drawing
32 7
11
SW 18mm SW 19mm
SW 22mm
5 2
3
Ø 1,2 Ø 18
Ø 21 M16 x 1,5 M12 x 1
Ø 20,2 M12 x 1
M20 x 1,5 Ø 22,2
2
29 21 2,8
SW 19mm
SW 17,7mm
max. 4,5
SW 17mm SW 13,4mm
Bestell-Daten / Order Data Polzahl Contacts
Befestigungsgewinde Fixing thread
Bestell-Nr. Ordering-No.
Polzahl Contacts
Befestigungsgewinde Fixing thread
Bestell-Nr. Ordering-No.
4
M20 x 1,5
99 0633 500 04
4
M16 x 1,5
09 0631 90 04
Technische Daten / Specifications Polzahl Steckverbinder Verriegelung Anschlussart Anschlussquerschnitt Kabeldurchlass Schutzart Mechanische Lebensdauer Obere Grenztemperatur Untere Grenztemperatur Bemessungsspannung Bemessungs-Stoßspannung Verschmutzungsgrad Überspannungskategorie Isolierstoffgruppe Bemessungsstrom (40°C) Durchgangswiderstand Material Kontakt Kontaktoberfläche Material Kontaktkörper Material Gehäuse
657
4 schrauben/screw schraubklemm, tauchlöten/screw clamp, dip solder max. 1,5 mm2 (max. AWG 16)/— — IP67 > 100 Steckzyklen/> 100 mating cycles + 85 °C – 40 °C 63 V 1500 V 3 IIl lll 12 A ≤ 3 mΩ CuZn (Messing/brass) Au (Gold/gold) PA Zink Druckguss vernickelt/zinc diecasting nickel plated, CuZn (Messing vernickelt/brass nickel plated)
Number of contacts Connector locking system Termination Wire gauge Cable outlet Degree of protection Mechanical operation Upper temperature Lower temperature Rated voltage Rated impulse voltage Pollution degree Overvoltage categorie Material group Rated current (40 °C) Contact resistance Material of contact Contact plating Material of contact body Material of housing
M12-T
Automatisierungstechnik - Sonder - Serie 813 Automation Technology - Special - 813 Series Flanschstecker mit T-Kodierung, Power, mit Litzen Male panel mount connector with T-coding, Power, with single wires
Flanschstecker mit T-Kodierung, Power, von vorn verschraubbar, mit Litzen Male panel mount connector with T-coding, Power, front fastened, with single wires
Abbildung / Figure
Maßzeichnung / Drawing 23,55 20 11
200
2
SW 17mm SW 13,4mm
Ø 18
Ø 18 M12 x 1
200
Ø 21 M16 x 1,5 M12 x 1
2
M16 x 1,5
13
23,6 21 2,8
SW 19mm
max. 4,5
SW 17mm SW 13,4mm
Bestell-Daten / Order Data Polzahl Contacts
Befestigungsgewinde Fixing thread
Bestell-Nr. Ordering-No.
Polzahl Contacts
Befestigungsgewinde Fixing thread
Bestell-Nr. Ordering-No.
4
M16 x 1,5
09 0631 700 04
4
M16 x 1,5
09 0631 120 04
Technische Daten / Specifications Polzahl Steckverbinder Verriegelung Anschlussart Anschlussquerschnitt Kabeldurchlass Schutzart Mechanische Lebensdauer Obere Grenztemperatur Untere Grenztemperatur Bemessungsspannung Bemessungs-Stoßspannung Verschmutzungsgrad Überspannungskategorie Isolierstoffgruppe Bemessungsstrom (40°C) Durchgangswiderstand Material Kontakt Kontaktoberfläche Material Kontaktkörper Material Gehäuse
4 schrauben/screw Litzen (AWG 16)/single wires (AWG 16) max. 1,5 mm2 (max. AWG 16) — IP67 > 100 Steckzyklen/> 100 mating cycles + 85 °C – 40 °C 63 V 1500 V 3 IIl lll 12 A ≤ 3 mΩ CuZn (Messing/brass) Au (Gold/gold) PA Zink Druckguss vernickelt/zinc diecasting nickel plated
Number of contacts Connector locking system Termination Wire gauge Cable outlet Degree of protection Mechanical operation Upper temperature Lower temperature Rated voltage Rated impulse voltage Pollution degree Overvoltage categorie Material group Rated current (40 °C) Contact resistance Material of contact Contact plating Material of contact body Material of housing
658
M12-T
Automatisierungstechnik - Sonder - Serie 813 Automation Technology - Special - 813 Series Flanschstecker mit T-Kodierung, Power, mit Litzen, M20 x 1,5 Male panel mount connector with T-coding, Power, with single wires, M20 x 1,5 Abbildung / Figure
Maßzeichnung / Drawing
20
200 3,6
Ø 23 M12 x 1
M20 x 1,5
13
SW 22mm
Bestell-Daten / Order Data Polzahl Contacts
Befestigungsgewinde Fixing thread
Bestell-Nr. Ordering-No.
4
M20 x 1,5
09 0631 642 04
Technische Daten / Specifications Polzahl Steckverbinder Verriegelung Anschlussart Anschlussquerschnitt Kabeldurchlass Schutzart Mechanische Lebensdauer Obere Grenztemperatur Untere Grenztemperatur Bemessungsspannung Bemessungs-Stoßspannung Verschmutzungsgrad Überspannungskategorie Isolierstoffgruppe Bemessungsstrom (40°C) Durchgangswiderstand Material Kontakt Kontaktoberfläche Material Kontaktkörper Material Gehäuse
659
4 schrauben/screw Litzen (AWG 16)/single wires (AWG 16) max. 1,5 mm2 (max. AWG 16) — IP67 > 100 Steckzyklen/> 100 mating cycles + 85 °C – 40 °C 63 V 1500 V 3 IIl lll 12 A ≤ 3 mΩ CuZn (Messing/brass) Au (Gold/gold) PA CuZn (Messing vernickelt/brass nickel plated)
Number of contacts Connector locking system Termination Wire gauge Cable outlet Degree of protection Mechanical operation Upper temperature Lower temperature Rated voltage Rated impulse voltage Pollution degree Overvoltage categorie Material group Rated current (40 °C) Contact resistance Material of contact Contact plating Material of contact body Material of housing
M12-T
Automatisierungstechnik - Sonder - Serie 813 Automation Technology - Special - 813 Series Flanschdose mit T-Kodierung, Power, Schraubklemmanschluss Female panel mount connector with T-coding, Power, screw clamp connection
Flanschdose mit T-Kodierung, Power, von vorn verschraubbar, tauchlöten Female panel mount connector with T-coding, Power, front fastened, dip solder
Abbildung / Figure
Maßzeichnung / Drawing 25,5 17,5 2,8 5 7,5 2
26,9 7
SW 18mm SW 19mm
SW 22mm
3
Ø 1,2 Ø 18
Ø 21 M16 x 1,5 M12 x 1
Ø 20,2 M12 x 1
M20 x 1,5 Ø 22,2
2
SW 19mm
SW 17,7mm
max. 4,5
SW 17mm SW 13,4mm
Bestell-Daten / Order Data Polzahl Contacts
Befestigungsgewinde Fixing thread
Bestell-Nr. Ordering-No.
Polzahl Contacts
Befestigungsgewinde Fixing thread
Bestell-Nr. Ordering-No.
4
M20 x 1,5
99 0634 500 04
4
M16 x 1,5
09 0632 90 04
Technische Daten / Specifications Polzahl Steckverbinder Verriegelung Anschlussart Anschlussquerschnitt Kabeldurchlass Schutzart Mechanische Lebensdauer Obere Grenztemperatur Untere Grenztemperatur Bemessungsspannung Bemessungs-Stoßspannung Verschmutzungsgrad Überspannungskategorie Isolierstoffgruppe Bemessungsstrom (40°C) Durchgangswiderstand Material Kontakt Kontaktoberfläche Material Kontaktkörper Material Gehäuse
4 schrauben/screw schraubklemm, tauchlöten/screw clamp, dip solder max. 1,5 mm2 (max. AWG 16)/— — IP67 > 100 Steckzyklen/> 100 mating cycles + 85 °C – 40 °C 63 V 1500 V 3 IIl lll 12 A ≤ 3 mΩ CuZn (Messing/brass), CuSn (Bronze/bronze) Au (Gold/gold) PA Zink Druckguss vernickelt/zinc diecasting nickel plated, CuZn (Messing vernickelt/brass nickel plated)
Number of contacts Connector locking system Termination Wire gauge Cable outlet Degree of protection Mechanical operation Upper temperature Lower temperature Rated voltage Rated impulse voltage Pollution degree Overvoltage categorie Material group Rated current (40 °C) Contact resistance Material of contact Contact plating Material of contact body Material of housing
660
M12-T
Automatisierungstechnik - Sonder - Serie 813 Automation Technology - Special - 813 Series Flanschdose mit T-Kodierung, Power, mit Litzen Female panel mount connector with T-coding, Power, with single wires
Flanschdose mit T-Kodierung, Power, von vorn verschraubbar, mit Litzen Female panel mount connector with T-coding, Power, front fastened, with single wires
Abbildung / Figure
Maßzeichnung / Drawing 23,4 17,5 2,8 7,5 2
200
200
SW 17mm SW 13,4mm
Ø 18
Ø 21 M16 x 1,5 M12 x 1
Ø 18 M12 x 1
M16 x 1,5
1,5
23,4 19,5 11,5 2
SW 19mm
max. 4,5
SW 17mm SW 13,4mm
Bestell-Daten / Order Data Polzahl Contacts
Befestigungsgewinde Fixing thread
Bestell-Nr. Ordering-No.
Polzahl Contacts
Befestigungsgewinde Fixing thread
Bestell-Nr. Ordering-No.
4
M16 x 1,5
09 0632 700 04
4
M16 x 1,5
09 0632 120 04
Technische Daten / Specifications Polzahl Steckverbinder Verriegelung Anschlussart Anschlussquerschnitt Kabeldurchlass Schutzart Mechanische Lebensdauer Obere Grenztemperatur Untere Grenztemperatur Bemessungsspannung Bemessungs-Stoßspannung Verschmutzungsgrad Überspannungskategorie Isolierstoffgruppe Bemessungsstrom (40°C) Durchgangswiderstand Material Kontakt Kontaktoberfläche Material Kontaktkörper Material Gehäuse
661
4 schrauben/screw Litzen (AWG 16)/single wires (AWG 16) max. 1,5 mm2 (max. AWG 16) — IP67 > 100 Steckzyklen/> 100 mating cycles + 85 °C – 40 °C 63 V 1500 V 3 IIl lll 12 A ≤ 3 mΩ CuSn (Bronze/bronze) Au (Gold/gold) PA Zink Druckguss vernickelt/zinc diecasting nickel plated
Number of contacts Connector locking system Termination Wire gauge Cable outlet Degree of protection Mechanical operation Upper temperature Lower temperature Rated voltage Rated impulse voltage Pollution degree Overvoltage categorie Material group Rated current (40 °C) Contact resistance Material of contact Contact plating Material of contact body Material of housing
M12-T
Automatisierungstechnik - Sonder - Serie 813 Automation Technology - Special - 813 Series Flanschdose mit T-Kodierung, Power, mit Litzen, M20 x 1,5 Female panel mount connector with T-coding, Power, with single wires, M20 x 1,5 Abbildung / Figure
Maßzeichnung / Drawing
200
M20 x 1,5
3,9
Ø 23 M12 x 1
1,5
19,5 11,5
SW 22mm
Bestell-Daten / Order Data Polzahl Contacts
Befestigungsgewinde Fixing thread
Bestell-Nr. Ordering-No.
4
M20 x 1,5
09 0632 642 04
Technische Daten / Specifications Polzahl Steckverbinder Verriegelung Anschlussart Anschlussquerschnitt Kabeldurchlass Schutzart Mechanische Lebensdauer Obere Grenztemperatur Untere Grenztemperatur Bemessungsspannung Bemessungs-Stoßspannung Verschmutzungsgrad Überspannungskategorie Isolierstoffgruppe Bemessungsstrom (40°C) Durchgangswiderstand Material Kontakt Kontaktoberfläche Material Kontaktkörper Material Gehäuse
4 schrauben/screw Litzen (AWG 16)/single wires (AWG 16) max. 1,5 mm2 (max. AWG 16) — IP67 > 100 Steckzyklen/> 100 mating cycles + 85 °C – 40 °C 63 V 1500 V 3 IIl lll 12 A ≤ 3 mΩ CuSn (Bronze/bronze) Au (Gold/gold) PA CuZn (Messing vernickelt/brass nickel plated)
Number of contacts Connector locking system Termination Wire gauge Cable outlet Degree of protection Mechanical operation Upper temperature Lower temperature Rated voltage Rated impulse voltage Pollution degree Overvoltage categorie Material group Rated current (40 °C) Contact resistance Material of contact Contact plating Material of contact body Material of housing
662
M12-T
Automatisierungstechnik - Sonder - Serie 813 Automation Technology - Special - 813 Series Montageanleitung Assembly instruction
Abisoliermaße Fanschsteckverbinder, Schraubklemmanschluss, nicht schirmbar Strip measures panel mount connectors, screw clamp connection, not shieldable
20
teln abman e tl a m is d n n isoliere
Litzenquerschnitt Wire cross section max. 1,5 mm2 4-polig/contacts
5 ab strip
Kontakteinsatz Contact insert 4 x 90° verdrehbar/adjustable
SW 19mm
Polbilder Contact arrangements
Anzugsdrehmoment Tightening torque SW 19 Mutter/nut = 5 Nm M18 x 0,75 M20 x 1,5 = 5 Nm
Stifteinsatz (Steckseite) Male insert (mating side)
Buchseneinsatz (Steckseite) Female insert (mating side)
4 pol 4 contacts
4 1 3 2 45°
663
1 2 3 4
X –2,55 0,00 2,55 0,00
Y 0,00 –2,55 0,00 2,55
1 2 3 4
braun/brown weiß/white blau/blaue schwarz/black
4 1 3 2 45°
1 2 3 4
X 2,55 0,00 –2,55 0,00
Y 0,00 –2,55 0,00 2,55
1 2 3 4
braun/brown weiß/white blau/blaue schwarz/black
M12-T
Automatisierungstechnik - Sonder - Serie 813 Automation Technology - Special - 813 Series Montageausschnitt Panel cut out
Flanschsteckverbinder Panel mount connectors
Mit Durchgangsbohrung With bore hole
Mit Fläche als Verdrehschutz With flats as anti-rotation device
Mit Gewinde, einschraubbar With thread to screw in
A
B
C
45°
A B C PG 9 PG 9 16,2 15,3 M16x1,5 M16x1,5 17,0 16,1 Anzugsdrehmoment/Tightening moment
13,5
1 x 45°
Metallgehäuse/Metal housing 6,25 Nm Kunststoffgehäuse/Plastic housing 3,75 Nm
alternativ/alternativ
Flanschsteckverbinder, von vorn verschraubbar Panel mount connectors, front fastened Mit Durchgangsbohrung With bore hole
C PG 9 15,3 M16x1,5 16,1
C
Mit Fläche als Verdrehschutz With flats as anti-rotation device
Anzugsdrehmoment/Tightening moment 13,5
Metallgehäuse/Metal housing 6,25 Nm Kunststoffgehäuse/Plastic housing 3,75 Nm
1 x 45° max. 4,5
M16 x 1,5
Flanschsteckverbinder positionierbar Panel mount connectors positioning possible
Anzugsdrehmoment/Tightening moment Metallgehäuse/Metal housing 6,25 Nm Kunststoffgehäuse/Plastic housing 3,75 Nm
Flanschsteckverbinder Schraubklemmanschluss Panel mount connectors screw clamp connection Mit Durchgangsbohrung With bore hole
Mit Gewinde, einschraubbar With thread to screw in
1 x 45°
M20 x 1,5
Ø 21
Ø 20,1
45°
Anzugsdrehmoment/Tightening moment M20 x 1,5 5 Nm min. 2 max. 3,5
664