Panasonic RQ-2102 Holding Handle Replacement
ID de guía: 41751 - Borrador: 2019-01-16
Panasonic RQ-2102 Holding Handle Replacement This guide shows one how to replace the handle on the Panasonic RQ-2102 Cassette Recorder.
Escrito por: Andrew Campbell
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 1 de 4
Panasonic RQ-2102 Holding Handle Replacement
ID de guía: 41751 - Borrador: 2019-01-16
INTRODUCCIÓN In this guide, you will learn how to replace the holding handle. Because the handle is a thin plastic piece, after heavy use it is more likely to break. If the handle is actually broken, then replacing it is easy. However if the two handle catches, which holds the handle in place, are broken then the entire body needs to be replaced due to them being molded to the body.
HERRAMIENTAS: Phillips #0 Screwdriver (1)
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 2 de 4
Panasonic RQ-2102 Holding Handle Replacement
ID de guía: 41751 - Borrador: 2019-01-16
Paso 1 — Holding Handle
Remove the three M5-0.8 x 12 mm Phillips #0 screws from the back of the device body
Remove two more screws from inside the battery compartment
Cautiously remove the back of the device body so that the cord, which connects both sides, is not damaged.
[All screws are the same size]
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 3 de 4
Panasonic RQ-2102 Holding Handle Replacement
ID de guía: 41751 - Borrador: 2019-01-16
Paso 2
Carefully remove the handle, making sure the handle catches on the sides are not broken
Replace the old handle with the new one
If the handle catches are broken, the device will need to be replaced To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2019-09-11 07:02:00 AM .
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 4 de 4