Razor A Handle Grips Replacement
ID de guía: 11455 - Borrador: 2014-01-28
Razor A Handle Grips Replacement Remove an existing pair of handle grips and install a replacement.
Escrito por: Jordyn
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 1 de 5
Razor A Handle Grips Replacement
ID de guía: 11455 - Borrador: 2014-01-28
INTRODUCCIÓN Do your hands hurt or slip when riding your scooter? Chances are your handle grips need to be replaced. This guide will show you how.
HERRAMIENTAS:
PARTES:
Container for water (1)
Razor Scooter Handle Grips (1)
Utility Scissors (1)
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 2 de 5
Razor A Handle Grips Replacement
ID de guía: 11455 - Borrador: 2014-01-28
Paso 1 — Handle Grips
If the scooter does not already have handle grips, skip to step 2.
Locate the handle grips at the upper ends of the T-tube.
Be careful to keep the scissors away from your other hand while cutting the handle grips.
Wedge one end of a pair of scissors between the metal T-tube and a handle grip, with the cutting edge toward the handle grip. Cut the handle grip off.
Repeat for the other handle grip.
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 3 de 5
Razor A Handle Grips Replacement
ID de guía: 11455 - Borrador: 2014-01-28
Paso 2
Soak the replacement handle grips in warm water for 2-3 minutes.
The longer you soak the handle grips in water, the larger they get. Soaking the handle grips for a long time will not damage them.
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 4 de 5
Razor A Handle Grips Replacement
ID de guía: 11455 - Borrador: 2014-01-28
Paso 3
Each handle grip should now slide onto the T-tube with ease. If not, soak the handle grip(s) in warm water for another 1-3 minutes.
Holding the T-tube with one hand, slide a handle grip completely onto the T-tube.
Repeat for the other handle grip if installing both.
Let the handle grips dry for 24 hours before use.
La versión más reciente de este documento fue generada en 2019-08-24 06:35:37 AM .
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 5 de 5
