Kenwood Chef A701A Power Cable Replacement

Kenwood Chef A701A Power Cable Replacement Replacing the power cable on a Kenwood Chef Guide is based on an A701A

Escrito por: Grant

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 4

Kenwood Chef A701A Power Cable Replacement

HERRAMIENTAS: Flathead Screwdriver (1) Wire stripper/crimping tool (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 4

Kenwood Chef A701A Power Cable Replacement

Paso 1 — Remove Cable Grips



Turn the mixer upside down



Remove the two screws holding the white cable grip.



Remove the black cable grip. The long screw also holds the cover onto the terminal block

Paso 2 — Remove the old cable

© iFixit — CC BY-NC-SA

es.iFixit.com



Remove the cable cover to expose the terminal block.



Remove the wires from the live and neutral terminals.



Thread the cables out though the cover and then from the mixer chassis

Página 3 de 4

Kenwood Chef A701A Power Cable Replacement

Paso 3 — Refit & Reassemble



To refit simply follow the removal process in reverse



Be sure to connect the wires to the correct terminals, Brown - Live, Blue, Neutral.



If fitting a new plug ensure it is fitted with the appropriate fuse. If in any doubt consult a compitent electrician/electrical engineer

To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2017-09-08 10:27:36 AM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 4 de 4