Kenwood Chef A701A Power Cable Replacement
Kenwood Chef A701A Power Cable Replacement Replacing the power cable on a Kenwood Chef Guide is based on an A701A
Escrito por: Grant
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 1 de 4
Kenwood Chef A701A Power Cable Replacement
HERRAMIENTAS: Flathead Screwdriver (1) Wire stripper/crimping tool (1)
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 2 de 4
Kenwood Chef A701A Power Cable Replacement
Paso 1 — Remove Cable Grips
Turn the mixer upside down
Remove the two screws holding the white cable grip.
Remove the black cable grip. The long screw also holds the cover onto the terminal block
Paso 2 — Remove the old cable
© iFixit — CC BY-NC-SA
es.iFixit.com
Remove the cable cover to expose the terminal block.
Remove the wires from the live and neutral terminals.
Thread the cables out though the cover and then from the mixer chassis
Página 3 de 4
Kenwood Chef A701A Power Cable Replacement
Paso 3 — Refit & Reassemble
To refit simply follow the removal process in reverse
Be sure to connect the wires to the correct terminals, Brown - Live, Blue, Neutral.
If fitting a new plug ensure it is fitted with the appropriate fuse. If in any doubt consult a compitent electrician/electrical engineer
To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2017-09-08 10:27:36 AM .
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 4 de 4