Ematic eGlide 4 Rear Panel Replacement
Ematic eGlide 4 Rear Panel Replacement This guide will help you remove the rear panel of your Emetic eGlide 4 to access the internal parts.
Escrito por: Bailey Hughes
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 1 de 4
Ematic eGlide 4 Rear Panel Replacement
INTRODUCCIÓN This guide will help you remove the rear panel of your Emetic eGlide 4 to access the internal parts by instructing you where to find anchoring screws and how to remove them. There is a screw on the bottom of the device that holds the front screen and rear panel together. Once the screw is removed it releases the rear panel away from the device, making internal part visible.
HERRAMIENTAS:
PARTES:
Phillips #00 Screwdriver (1)
Ematic eGlide 4 Rear Panel (1)
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 2 de 4
Ematic eGlide 4 Rear Panel Replacement
Paso 1 — Rear Panel
Remove the 4.6mm Phillips #00 screw at the base of the device.
Slide the rear panel away from the base parallel to the screen.
Paso 2
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 3 de 4
Ematic eGlide 4 Rear Panel Replacement
Paso 3
Carefully remove the speakers from the rear panel.
Pull the speakers off of the rear panel.
To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2017-09-12 08:15:53 AM .
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 4 de 4