Canon PowerShot SX50 HS Battery Replacement
Canon PowerShot SX50 HS Battery Replacement This is a necessary step before continuing to disassemble your camera any further. The guide will tell you how to remove the battery pack.
Escrito por: Megan Rund
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 1 de 3
Canon PowerShot SX50 HS Battery Replacement
INTRODUCCIÓN Remove the battery of the Canon PowerShot SX50 HS.
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 2 de 3
Canon PowerShot SX50 HS Battery Replacement
Paso 1 — Battery
Locate the battery compartment on the bottom of the camera.
Push the latch on the outside of the battery door to the right to get to the battery pack inside.
Pull the brown latch on the inside of the battery door towards your palm (to the left). The battery pack should pop out (battery not pictured).
Now remove the battery pack from the camera with your fingers.
Paso 2
To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2017-08-28 07:26:02 PM .
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 3 de 3