Mounting flange
BF 18-F Dimensions 29 30
14
24
10.5
21
ø 18
11
12
4.2
4
Dead stop
7.8 4.1 14
Technical data Model Number
General specifications Inside diameter
18 mm
BF 18-F
Ambient conditions Ambient temperature
-25 ... 85 °C (248 ... 358 K)
Mechanical specifications Material
Polycarbonate (PC), black
Mounting flange with dead stop, 18 mm
Features • Black plastic housing with dead stop for all cylindrical sensors with M18 thread • Easy sensor replacement via fixing flap in the top of the fixing flange • Embeddable sensors lie flush with the surface of the fixing flange • The cap of a non-embeddable sensor protrudes through the fixing flange. This allows non-embeddable sensors to be easily mounted on metal surfaces.
Note Installation • Position the mounting bracket on the desired place • Mark the position of drilling holes in the mid section of the oblong holes • Drill the mounting holes through the surface • Screw on the mounting bracket slightly via the lateral oblong holes by using suitable M4 screws • Stick the sensor through the mounting bracket and fix the sensor by the lid on the upper part of the bracket • Adjust the bracket and make the final positioning • Fix the mounting bracket finally with the screws
Release date: 2009-04-20 16:35 Date of issue: 2009-04-20 107460_ENG.xml
• max. 8 mm range of adjustment is provided for the positioning of the flange by means of the elongated holes on the side
Subject to reasonable modifications due to technical advances.
Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
1