ES-WQ-PWHP
For Residential and Light Commercial Applications Job Name ––––––––––––––––––––––––––––––––––––––––––––
Contractor –––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––––
Representative –––––––––––––––––––––––––––––––––––––––––
Plastic Filter Housings Top Quality and Economical Plastic Filter Housings Single Cartridge Filter Housings Sizes: 1⁄4" – 11⁄2" (6 – 40mm) Our poly filter housings are manufactured from the highest quality 100% polypropylene acrylic styrene (for clear housings). Leak-proof sealing is accomplished by compression against a top seated EPDM O-ring located in the housing’s sump. Thick wall and added ribs make the housings ideal for a wide range of applications. Polypropylene construction provides excellent chemical resistance in most installations environments. Housings supplied with and without pressure relief valves. See specifications table for pressure and temperature ratings.
Full product line We offer a complete line of poly filter housings for virtually every application where single cartridge housings are typically used. Select from standard, heavy-duty, full-flow, high-purity, hightemp and valve-in-head models.
Features •F ull product line for more types, models, pipe fittings and options • Heavy-duty construction, made using high-quality grade polypropylene • Superior chemical resistance from many aggressive chemicals • Buttress thread design for superior security • Thick side walls with heavy-duty ribs to provide greater strength • Temperature rated to 100° F/37.8 ° C • Cap, sump and top-seated O-rings compress to provide leak proof sealing See specifications table for more details.
Buttress thread design — Provides greater security
Heavy-duty construction — Housings are made entirely of the highest quality grade polypropylene
NOTICE The information contained herein is not intended to replace the full product installation and safety information available or the experience of a trained product installer. You are required to thoroughly read all installation instructions and product safety information before beginning the installation of this product.
! WARNING Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Dimensions
HOUSING TYPE
SIZE
DIMENSIONS A
Standard Standard Standard High Temp High Temp Commercial Commercial Full Flow (FF) Full Flow (FF)
B
C
D
F
G
H
in.
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
5 10 20 10 20 10 20 10 20
4.28 4.72 4.72 5.35 5.35 5.35 5.35 7.28 7.28
108 120 120 136 136 136 136 186 186
1.57 1.57 1.57 2.22 2.22 2.22 2.22 3.03 3.03
40 40 40 56 56 56 56 77 77
1.18 1.18 1.18 2.28 2.28 2.28 2.28 3.03 3.03
30 30 30 58 58 58 58 77 77
0.16 0.16 0.16 0.23 0.23 0.23 0.23 0.275 0.275
4 4 4 6 6 6 6 7 7
5.7 10.5 20.47 10.43 20.47 10.43 20.47 11.33 21.25
145 267 520 265 520
7 11.0 21.26 11.49 21.26 11.49 21.26 11.57 21.65
178 279 540 292 540 292 540 294 550
7.5 11.8 22.8 12.5 22.8 12.5 22.8 14.0 24.0
191 300 579 318 579 318 579 356 25
Full Flow (FF) Series (10" and 20")
High Temp (10" and 20")
265 520 288 540
Blue/Black (10" and 20")
Clear (10" and 20")
Specifications Material, sumps & caps Material, o-rings Maximum temperature (standard) Maximum temperature (high temp) Maximum temperature (full flow) and (valve in head) Minimum temperature Maximum pressure (standard) Maximum pressure (full flow) Maximum pressure (valve in head) Burst test
High grade polypropylene. EPDM is standard; Viton is available as a spare part. 100°F (37.8°C) 200°F (93°C) 100°F (37.8°C) 40°F (4°C) 100 psi (6.9 bar) 90 psi (6.21 bar) 100 psi (6.9 bar) Tested to 500 psi. (150,000 cycles from 0 to 125 psi)
PWHIB10FF
Individually Boxed Plastic Housings in Master Cartons MODEL NO.
PWHIB34VIH PWHIB10FF PWHIB10FFCL PWHIB20FF
ORDERING CODE
SIZE
PIPE
TYPE
SUMP
CAP
CASE QTY.
7100267 7100268 7100516 7100269
10" 10" 10" 20"
3/4" 1" 1" 1"
Valve-In-Head Full Flow (FF) Full Flow (FF) Full Flow (FF)
Clear Blue Clear Blue
White Black Black Black
4 4 4 4
*Complete with housing, wrench, bracket and mounting screws
Poly Filter Housing MODEL NO.
ORDERING CODE
SIZE
PIPE
SUMP
CAP
# CASE
7100589
5"
12
⁄"
White
White
12
7100271 7100273 7100275 7100284 7100285
10" 10" 10" 10" 20"
14
⁄" ⁄" 3⁄4" 1" 1"
Clear Clear Clear Clear Clear
White PR White PR White PR Black PR Black PR
4 4 4 4 4
10" 10" 10"
14
⁄" ⁄" 3⁄4"
Blue Blue Blue
Black PR Black PR Black PR
4 4 4
20"
12
⁄"
Blue
Black PR
6
10" 10"
34
⁄" ⁄"
Clear Blue
6 6
6 6
20" 20"
34 34
⁄" ⁄"
Clear Blue
6 6
6 6
10" 10" 10"
34
⁄" 1" 11⁄2"
Blue Blue Blue
Black PR Black PR Black PR
4 4 4
20" 20" 20"
⁄" 1" 11⁄2"
Blue Blue Blue
Black PR Black PR Black PR
4 4 4
⁄" ⁄"
Red Red
Red Red
4 4
White Housings PWHP512W
Clear Housings PWHP1014CPR PWHP1012CPR PWHP1034CPR PWHP10FF1CPR PWHP20FF1CPR
12
10" Residential Housings PWHP1014BPR PWHP1012BPR PWHP1034BPR
7100277 7100279 7100281
12
20" Residential Housings PWHP2012BPR
7100283
10" Commercial Housings PWHP10COM34CPR PWHP10COM34BPR
7100668 7100669
34
20" Commercial Housings PWHP20COM34CPR PWHP20COM34BPR
7100644 7100670
10" Full Flow Housings PWHP10FF34BPR PWHP10FF1BPR PWHP10FF15BPR
7100286 7100288 7100290
20" Full Flow Housings PWHP20FF34BPR PWHP20FF1BPR PWHP20FF15BPR
7100291 7100293 7100295
34
High Temp Housings (200°F / 93°C) PWHPHT1034 PWHPHT2034
7100296 7100297
10" 20"
34
34
MODEL NO.
ORDERING CODE
SIZE/TYPE
# CASE
Mounting Brackets - includes housing mounting screws PWMBVIH PWMBSTD1 PWMBSTD2 PWMBSTD3 PWMBCOM1 PWMBFF1 PWMBFF2 PWMBFF3
7300605 7100463 7100464 7100465 7300808 7100466 7100467 7100468
Brkt, VIH Housing Single, 10" & 20" Residential Housings Double, 10" & 20" Residential Housings Triple, 10" & 20" Residential Housings Single 10" & 20" Commercial Hsg Single, 10" & 20" Full Flow Housing Double, 10" & 20" Full Flow Housing Triple, 10" & 20" Full Flow Housing
1 1 1 1
1 1 1 1
Wrenches PWWRSTDHSG PWWRFFHSG PWWRHTHSG PWWRCOM PWWRDUAL
7100298 7100299 7300618 7300806 7100300
Wrench for Residential Housings Wrench for Full Flow Housing Hi Temp Housing Wrench Wrench for Commercial Housing Dual Wrench for Membrane and Residential Filter Housings
7300393 7300395 7300809
Mounting Screws for standard Housings Mounting Screws for Full Flow Housings Mounting Screws for Commercial Housings
7300397 7300398 7300399 7300807
O-Ring for standard housings O-Ring for Full Flow housings O-Ring for high temp housings O-Ring for Commercial Housings
1 1 1
1 1
Mounting Screws PWMSSTDHSG PWMSFFHSG PWMSCOMHSG
1 1
1
O-Rings PWORSTDHSG PWORFFHSG PWORHTHSG PWORCOMHSG
1 1 1
1
USA: T: (800) 224-1299 • F: (978) 794-1848 • Watts.com/PureWater Canada: T: (905) 332-4090 • F: (905) 332-7068 • Watts.ca/PureWater Latin America: T: (52) 81-1001-8600 • F: (52) 81-8000-7091 • Watts.com/PureWater
ES-WQ-PWHP 1713
© 2017 Watts
