TDK Life on Record Trek 360 Battery Replacement
ID de guía: 50835 - Borrador: 2015-12-29
TDK Life on Record Trek 360 Battery Replacement Replace the battery in the TDK Life on Record Trek 360.
Escrito por: Helen Huynh
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 1 de 5
TDK Life on Record Trek 360 Battery Replacement
ID de guía: 50835 - Borrador: 2015-12-29
INTRODUCCIÓN This guide will aid you in replacing your old or worn out battery. Replacing the battery will also increase usage time and enhance all other functions of the device.
HERRAMIENTAS: T5 Torx Screwdriver (1) Spudger (1) iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 2 de 5
TDK Life on Record Trek 360 Battery Replacement
ID de guía: 50835 - Borrador: 2015-12-29
Paso 1 — Battery
Turn the TDK Life on Record Trek 360 on its side as shown and remove the four 8 mm screws holding the battery cover in place with the T-5 torx screw bit.
Before beginning this guide, be sure that the battery is completely drained of charge. This prevents electrical injury.
Paso 2
Place a metal spudger between the small crease of the battery cover and the device, and apply downward pressure.
Pull down like a lever while continuing to apply downward pressure.
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 3 de 5
TDK Life on Record Trek 360 Battery Replacement
ID de guía: 50835 - Borrador: 2015-12-29
Paso 3
Using a spudger or plastic opening tool, lift the battery from the bottom right and rotate it upwards and toward you.
These images show the use of a metal spudger. Use a plastic opening tool or standard spudger to prevent damage to your device.
The battery does not lift STRAIGHT UP. Lifting in this manner could damage the battery, wires, and/or the device.
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 4 de 5
TDK Life on Record Trek 360 Battery Replacement
ID de guía: 50835 - Borrador: 2015-12-29
Paso 4
To remove the battery, use one hand to pull on the battery wires, use tweezers to pull on the connecting head of the speaker.
Take extreme caution when pulling. This requires some force, but pulling with extreme force can cause damage to the wire/battery/or device.
To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2019-07-10 02:54:28 AM .
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 5 de 5
