Canon EOS Rebel G Back Panel Latch Replacement
Canon EOS Rebel G Back Panel Latch Replacement How to replace faulty back panel latch.
Escrito por: Zach
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 1 de 5
Canon EOS Rebel G Back Panel Latch Replacement
INTRODUCCIÓN This guide teaches how to to install the back panel latch on your camera.
HERRAMIENTAS:
PARTES:
Phillips #00 Screwdriver (1)
Replacement Latch (1)
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 2 de 5
Canon EOS Rebel G Back Panel Latch Replacement
Paso 1 — Front Panel
Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.
Paso 2
Using your finger, peel back the textured grip so the components are separated.
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 3 de 5
Canon EOS Rebel G Back Panel Latch Replacement
Paso 3
Using the flat end of a spudger, loosen the connection between the front panel and the device.
Remove the front panel using your hands.
Paso 4 — Back Panel Latch
Using a 00 Phillips screw driver, unscrew the two screws located on the side of the camera.
© iFixit — CC BY-NC-SA
es.iFixit.com
Two 4.3 mm Phillips screws
Página 4 de 5
Canon EOS Rebel G Back Panel Latch Replacement
Paso 5
Open the back panel by pushing the locking latch up.
Lift the latch cover off of the camera body.
Slide the side latch (for the back door) up and then lift straight away from the camera body.
Paso 6
Sometimes the latch will detach while pushing it up.
To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2017-09-14 11:44:02 PM .
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 5 de 5