MORPHEUS CONVERTIBLE PC CASE MINI TOWER CONFIGURATION
Welcome to RIOTORO
Thank you for purchasing the MORPHEUS! The first convertible PC case, resizes to fit your evolving needs. The perforated mesh exterior and keeps the PC cool, and USB Type-C provides state-of-the-art connectivity.
Note: This manual is a guide for the Morpheus convertible case. For instructions on installing the motherboard and other components, please refer to their documentation.
1
MORPHEUS
CONVERTIBLE PC CASE
CONTENTS Before You Begin - Exploded view - What is in the box - Requirements
1
2
3
4 5 7
Back / Bottom Panel Assembly - Components required to build this section - Unpack components - Create an L-Shape structure - Secure the structure - Change the PCIe bracket - Install the exhaust fan
9 10 11 12 13 17
Middle Panel Assembly - Components required to build this section - Unpack components - Seure the structure - Secure the drive caddies
18 19 20 24
Top / Front Panel Assembly - Components required to build this section - Unpack components - Create an L-Shape structure - Secure the structure
26 27 28 29
4
Trim / Side Panel Assembly - Components required to build this section - Secure the trim to the structure - Install cooling bracket and filter - Install side panels
5
Installing All Components - Specifications - Motherboard installation - Connect the Front Panel Switches and LEDs - Power Supply Installation - SSD / HDD Installation - Fan Installation: Front, top, bottom - Attaching the Case Fan Cables - Water Cooling Installation - 120.0 mm or 140.0 mm options - GPU Installation
Everything Else - General Maintenace - Important Safety Information - LIMITED PRODUCT WARRANTY
37 38 40 41
44 45 46 47 48 49 50 51 52
54 55 56
2
Before You Begin
www.riotoro.com/Morpheus
MORPHEUS
CONVERTIBLE PC CASE
Exploded view
1
2
13 15
3
14 4
5
7
6 19
17 9
8
20
10
21 11
16
18
1. I/O panel 2. Dust filter 3. Top panel structure 4. Extension bracket 5. SSD cage 6. HDD cage 7. Middle panel 8. Cable management channels 9. Cooling bracket 10. Base plate structure 11. Bottom panel 12. Dust filters 13. Back panel structure 14. PCIe expasion bracket 15. Back trim 16. Front panel structure 17. Front trim 18. Red LED logo 19. Dust filter 20. Adjustable side panel 21. Thumb screws
12
Before You Begin
4
MORPHEUS
CONVERTIBLE PC CASE
WHAT’S IN THE BOX ITEM
IMAGE
1
2
3
MORPHEUS
PATENT PENDING OVERVIEW RIOTORO Morpheus, the world's first convertible PC case, allows you to resize your PC as your needs evolve. Morpheus can easily shape-shift to and from a short or tall ATX mid-tower. The entire exterior is perforated mesh, which combined with the stock dual 140.0 mm fans, keeps your PC’s components running cool and quiet even in extreme gaming configurations. Plenty of easy-to-install cooling options are available thanks to a removal cooling mount and support for additional fans or two 240mm radiators. Tool-less features, combined with the strategically placed cable routing channels, drive trays, and cooling bracket, make building Morpheus a snap. Plus we added state-of-the-art USB Type-C and USB 3.0 ports for high-speed connections to modern storage and mobile devices.
RIOTORO INC.
KEY DESIGN ELEMENTS
- Resizable from mid-to-mini tower height - High-density perforated mesh on all sides for superior cooling - USB-C and USB 3.0 ports - Dual compartments with streamlined airflow and isolate heat - Supports E-ATX, ATX, microATX and mini-ITX motherboards - Dual 120.0 mm fans, additional mounts for 140.0 mm fans and 240.0 mm water coolers - Optimized cable routes, mount points hassle free assembly - 2x 3.5-inch HDD plus, up to 4x 2.5-inch SSD out of the box
COMPONENT SECTIONS
BACK PANEL - High-airflow perforated mesh panel - 1x 80.0 mm exhaust fan BOTTOM PANEL - High-airflow perforated mesh panel - 2x 120.0 mm or 140.0 mm fans - ABS feet - Easily accessible dust filters to help keep the computer clean
CONFIGURATIONS:
MIDDLE PANEL - Dual chamber configuration - CPU cutout with rubber grommets, cable and management routes with velcro ties - Mini-Tower & Mid-Tower components - Removable storage brackets for 2x HDD and up to 4x SSD - Removable bracket with mounts for 2x 120.0 / 140.0 mm fans or up to 280.0 mm radiators
FRONT PANEL - High-airflow perforated mesh panel - Red LED RIOTORO bullhead logo TOP PANEL - High-airflow perforated mesh panel - I/O panel with 2 x USB Type-C, 2x USB 3.0, 1 x Headphone, 1x Microphone, RGB fan control (mode, color, brightness)
USE
SECTION 1
Build the base & back strucure
1
SECTION 2
Build the middle structure
1
SECTION 3
Build the front & top structure
1
Mouse Pad
Surface protection & quick reference
1
Side panel with magnetic filter
Cover both sides of the case
2
SIDE PANEL - High-airflow perforated mesh panel - Left and Right panels each consist of three resizable mesh sheets - Magnetic dust filter
ASSEMBLY MID-TOWER
MINI-TOWER
4
271.0 x 400.0 x 466.0 mm
271.0 x 466.0 x 466.0 mm
QTY
DESCRIPTION
Section One: take out components from protective bag, remove security thumb screws, position back panel in an upright position and tighten the screws. If you are building a Mini-Tower configuration make sure to change the expansion bracket and adjust back panel size. Section Two: take out components from protective bag, position and screw middle panel to section one. If you are building a Mid-Tower configuration make sure to add the expansion to the middle section, SSD expansion caddy and tighten screws. Section Three: take out components from protective bag, remove security thumb screws, position front panel in an upright position and tighten the screws. If you are building a Mini-Tower configuration, make sure to adjust front panel size, screw components to previous assembly and tighten screws. Section Four: take out components from protective bag and use red thumb screws to secure to previous sections. If you are building a Mini-Tower configuration make sure to adjust side panel size.
5
Before You Begin
5
MORPHEUS
CONVERTIBLE PC CASE
WHAT’S IN THE BOX ITEM
IMAGE
QTY
DESCRIPTION
USE
6
120.0 mm Red LED Fan
Front, Top, or Bottom
2
7
80.0 mm Exhaust Fan
Back
1
8
Screw M3 x 5mm
Trim installation
1
9
Screw M3 x 5mm
Structure installation
1
10
Screw 5 x 10KT
Fan installation (front/rear)
1
11
Thumb Screw 9*15mm (Red)
Side Panel
4
12
Thumb Screw 9*15mm (Black)
Side Panel
4
Before You Begin
6
MORPHEUS
CONVERTIBLE PC CASE
REQUIREMENTS In order to assemble Morpheus to the desired form factor (either mini or mid tower) you will need: 1. A flat working area (e.g. desk or table) with sufficient space
2. A magnetic Phillips screw driver 9
This means you need to have the Phillips screw driver available in order to complete this assembly and the type of screw you need.
Start by taking the entire content out of the box, sort them out by section, take out the quick start mouse mat and use it as general guide and building surface. Note: Handle all components with care, should you need any assistance go to www.riotoro.com/support
Before You Begin
7
1 Back / Bottom Panel Assembly
www.riotoro.com/Morpheus
MORPHEUS
BACK / BOTTOM PANEL ASSEMBLY
Components required to build this section: IMAGE
Mid
Chapter 1
QTY
DESCRIPTION
USE
Top & bottom trim
Back panel
1
PCIe bracket
Back panel
2
Adjustable top structure & body
Back panel
1
Bottom structure and feet
Bottom panel
1
Dust filter
Bottom panel
2
80.0 mm Exhaust Fan
Back panel
1
Screw M3 x 5mm
Trim installation
5
Screw M3 x 5mm
Structure installation
21
Screw 5 x 10KT
Fan installation
4
Mini
9
MORPHEUS
BACK / BOTTOM PANEL ASSEMBLY
Unpack components To start the assembly, you need to:
- Take out the preassembled bottom and back panel out of the bag.
- Remove the top back trim and set it aside for later use, additionally you need to remove security thumb screws on each side1
Note: 1 you may discard the security screws as they are not used for the assembly
Chapter 1
10
MORPHEUS
BACK / BOTTOM PANEL ASSEMBLY
Create an L-Shape structure
- Lift the back panel to an upright position, in order to make an L-Shaped structure, , tke out the shipping foam, mini tower expansion bracket and 80.0 mm fan and set them aside for later use. - Make sure the back and bottom panels are properly aligned and tighten the two structure screws (1 and 2) on each side of the L-Shape Structure.
2
9
Chapter 1
1
11
MORPHEUS
BACK / BOTTOM PANEL ASSEMBLY
Secure the structure
- Locate the two screw holes at the bottom of the structure, place and tighten two structure screws.
9
1 2
screw them from the outside in
Chapter 1
12
MORPHEUS
BACK / BOTTOM PANEL ASSEMBLY
Change the PCIe bracket In order to build a mini tower form factor, you need to change the expansion bracket. - Loosen and remove the two structure screws (1 and 2) that secure the adjustable top to the back panel body and set it aside. Remove the adjustable top and the mid tower expansion bracket.
slide upwards
2
9
Chapter 1
1
13
MORPHEUS
BACK / BOTTOM PANEL ASSEMBLY
Change the PCIe bracket - Take out the mini tower expansion bracket from the cardboard protection and attach it to the back panel body by using two structure screws.
9
1
2
screw them from the outside in
Chapter 1
14
MORPHEUS
BACK / BOTTOM PANEL ASSEMBLY
Change the PCIe bracket - Slide the adjustable top back into position and align the adjustable top and back panel body, additionally place and tighten five structure screws.
slide downwards
5
3 4
1 2
Chapter 1
15
MORPHEUS
BACK / BOTTOM PANEL ASSEMBLY
Install the exhaust fan - Align the fan to the back panel body, place and tighten the fan screws (provided in box PL01-1).
2
4
1
10
3
screw them from the outside in
Chapter 1
17
2 Middle Panel Assembly
www.riotoro.com/Morpheus
MORPHEUS
MIDDLE PANEL ASSEMBLY
Components required to build this section: IMAGE
USE
panel with 6x Cable Management Routing Channels
Middle panel
1
Base plate
Middle panel
1
HDD bracket for two drives
Middle panel
1
SSD bracket for two drives
Middle panel
2
Extension plate
Middle panel
1
HDD stabilizer
Middle panel
1
Screw M3 x 5mm
Chapter 2
QTY
DESCRIPTION
Structure installation
21
18
MORPHEUS
MIDDLE PANEL ASSEMBLY
Unpack components Provided a successful SECTION 1 assembly, now the next step is to install the middle panel and its components. To start the assembly, you need to: - Take out the preassembled middle panel and base plate out of the bags.
- Take out the HDD stabilizer and structure screws from Box PL02-1.
Chapter 2
19
MORPHEUS
MIDDLE PANEL ASSEMBLY
Secure the structure - Align the holes for the preassembled middle panel and base plate, join both parts by placing and tightening two (1 & 2) structure screws.
9
1
2 screw them from the outside in
Chapter 2
20
MORPHEUS
MIDDLE PANEL ASSEMBLY
Secure the structure - Get the HDD stabilizer, align the screw holes, place and tighten two structure screws in order to secure it into place.
9
1 2
Note: you need to have the Phillips screw driver available in order to complete this assembly.
Chapter 2
21
MORPHEUS
MIDDLE PANEL ASSEMBLY
Secure the structure Once the middle section is fully assembled, place it inside the SECTION 1 build. Make sure to align the screw holes to facilitate assembly. - Place the middle panel on top of the bottom panel and secure it into position using five structure screws; three (1, 2, & 3) to connect the back panel and middle panel and two (4 & 5) to connect the back panel and the HDD security arm. 9
1 4 5
2 3
screw them from the outside in
Chapter 2
22
MORPHEUS
MIDDLE PANEL ASSEMBLY
Secure the structure - Turn over the build, place and tighten a screw located in the bottom panel.
9
1
screw them from the outside in
Chapter 2
23
MORPHEUS
MIDDLE PANEL ASSEMBLY
Secure the drive caddies - Turn over the build to its upright position.
screw them from the outside in
Chapter 2
24
3 4 Top Trim//Front Side Panel Assembly
www.riotoro.com/Morpheus
MORPHEUS
TOP / FRONT PANEL ASSEMBLY
Components required to build this section: IMAGE
Chapter 3
QTY
DESCRIPTION
USE
Middle structure and dust filter
Front panel
1
Adjustable to and bottom structure
Front panel
1
Top and bottom trim
Front panel
1
120.0 mm Exhaust Fan
Front panel
2
Top structure, I/O panel & dust filter
Top panel
1
Screw M3 x 5mm
Trim installation
5
Screw M3 x 5mm
Structure installation
21
Screw 5 x 10KT
Fan installation
4
26
MORPHEUS
TOP / FRONT PANEL ASSEMBLY
Unpack components Provided a successful SECTION 2 assembly, now the next step is to install the top and front panels and their components. To start the assembly, you need to: - Take out the preassembled top and front panel out of the bag.
- Remove both top and bottom front trim and set it aside for later use, additionally you need to remove security thumb screws on each side2
Note: 2 you may discard the security screws as they are not used for the assembly
Chapter 3
27
MORPHEUS
TOP / FRONT PANEL ASSEMBLY
Create an L-Shape structure - Lift the front panel to an upright position, in order to make an L-Shaped structure, take out the cooling bracket and the two 120.0 mm red LED fans and set them aside for later use. - Make sure the front and top panels are properly aligned and tighten the two structure screws (1 and 2) on each side of the L-Shape Structure.
2
9
1
Note: be careful as the front panel is not secured.
Chapter 3
28
MORPHEUS
TOP / FRONT PANEL ASSEMBLY
Secure the structure - Locate the two screw holes at the bottom of the L-Structure, place and tighten two (1 and 2) structure screws.
9
1
2 screw them from the outside in
Chapter 3
29
MORPHEUS
TOP / FRONT PANEL ASSEMBLY
Secure the structure Once you have secured the two sides, you should have an L-shaped section ready for configuration. - Remove the structure screws, adjust the height of the top structure
2
9
1
screw them from the outside in
Chapter 3
30
MORPHEUS
TOP / FRONT PANEL ASSEMBLY
Secure the structure - Align the middle structure to the top and bottom structure, place and tighten four (1, 2, 3, 4, 5, 6, 7 and 8) structure screws
8 6
4 2
9
7 5 3 1
Chapter 3
31
MORPHEUS
TOP / FRONT PANEL ASSEMBLY
Secure the structure - Turn the L-Shape to an upright position and place it on top of section two build and remove filter
Chapter 3
32
MORPHEUS
TOP / FRONT PANEL ASSEMBLY
Secure the structure - Place and tighten four (1, 2, 3 and 4) structure screws to join all sections
2
9
1 4
3
screw them from the outside in
Chapter 3
33
MORPHEUS
TOP / FRONT PANEL ASSEMBLY
Secure the structure - Place and tighten two (1 and 2) structure screws to join the front and bottom panels, four (3, 4, 5 and 6) to join the middle and front panels and two (7 and 8) to join the middle and back panels
9
6
7
8
3 5
2
4
1
screw them from the outside in
Chapter 3
34
MORPHEUS
TOP / FRONT PANEL ASSEMBLY
Secure the structure - Place and tighten two (1 and 2) structure screws to join the back and top panels and tighten two (3 and 4) structure screws to join the middle and top panels 3 2
4
9
1
screw them from the outside in
Chapter 3
35
4 Trim / Side Panel Assembly
www.riotoro.com/Morpheus
MORPHEUS
TOP / FRONT PANEL ASSEMBLY
Components required to build this section:
IMAGE
Chapter 4
QTY
DESCRIPTION
USE
Top and bottom trim
Front panel
1
Adjustable side panel
Side panel
2
Magnetic filter
Sidepanel
2
Mid tower configuration magnetic filter
Side panel
2
Mini tower configuration magnetic filter
Side panel
2
Thumb Screw 9*15mm (Red)
Side Panel
4
Thumb Screw 9*15mm (Black)
Side Panel
4
37
MORPHEUS
TRIM / SIDE PANEL ASSEMBLY
Secure the trim to the structure - Start by positioning the bottom trim, place and tighten two (1 and 2) trim screws, place the top trim, place and tighten three (3, 4 and 5) trim screws and finally place and tighten four (6, 7, 8 and 9) structure screws. 7
6
8
3
4
5
tighten structure screws from the inside
9
8
2 1
9 tighten trim screws from the outside
Chapter 4
38
MORPHEUS
TRIM / SIDE PANEL ASSEMBLY
Secure the trim to the structure - Slide the top and bottom trim into position, place and tighten eight (1, 2, 3, 4, 5, 6, 7 and 8) trim screws
8
7
8 tighten structure screws from the inside
6 4
5
3
2 1
Chapter 4
39
MORPHEUS
TRIM / SIDE PANEL ASSEMBLY
Install cooling bracket and filter - Position and snap on the cooling bracket on the front panel, from the inside of Morpheus and secure it into position with one structure screw and put the dust filter back on
9
screw it from the outside in
Chapter 4
40
MORPHEUS
TRIM / SIDE PANEL ASSEMBLY
Install side panels Now you are ready to finalize the assembly, should you want to install your components, this would be the right time to start. If you want to finalize the assembly you need to: - Take out each side panel out of the bag
Chapter 4
41
MORPHEUS
TOP / FRONT PANEL ASSEMBLY
Install side panels - Choose which color of side panel screws you want to us, place the side panel into position, place and tighten the side panel screws
Note: Save the unused dust filter extension for a future use
Chapter 4
42
5 Ready, setup, go
www.riotoro.com/Morpheus
MORPHEUS
READY, SETUP, GO
Convertible Tower Black Steel, ABS Plastic No ATX, microATX, Mini-ITX Yes
EXPANSION
- External 5.25" Drive Bays: - External 3.5" Drive Bays: - Internal 3.5" Drive Bays: - Internal 2.5" Drive Bays: - Expansion Slots:
0 0 2 up to 4 up to 8
- Top Panel:
2x USB Type-C 2x USB 3.0 1x Headphone 1x Microphone
- Front included:
2x 120.0 mm red LED front 1x 80.0 mm rear
- Fan Mounts:
Front: 2x 120.0 mm, 2x 140.0 mm or 1x 200.0 mm Rear: 1x 80.0 mm Top: 2x 120.0 mm or 2x 140.0 mm fans Bottom: 2x 120.0 mm or 2x 140.0 mm fansv
- Water Cooling Mounts:
Front: up to 1x 120.0 mm or 1x 240.0 mm radiator Top: up to 1x 120.0 mm or 1x 240.0 mm radiator Bottom: up to 1x 120.0 mm or 1x 240.0 mm radiator
- Max GPU Length: - Max CPU Cooler Height: - Max PSU Length:
300.0 mm 130.0 mm 220.0 mm
MAX DIMENSIONS
COOLING SYSTEM
GENERAL
- Type: - Color: - Case Material: - With Power Supply: - Motherboard Compatibility: - Side Panel Window:
EXTERNAL PORTS
Specifications
Chapter 5
44
MORPHEUS
READY, SETUP, GO
Motherboard Installation Morpheus comes with enough mounting standoffs for a full ATX or smaller form factor. 1
Remove the thumb screws, side panel and install the I/O shield
2
Align the motherboards screw holes with the case standoff, attach the motherboard using the provided screws.
Note: From inside, snap the I/O panel into the cutout in the rear of the case.
Chapter 5
45
MORPHEUS
READY, SETUP, GO
Connect the Front Panel Switches and LEDs Morpheus’ front panel switches, LEDs, and USB ports have wire leads that need to be attached to header pins the motherboard. Use your motherboard manual to locate the proper header pins and attach the right connectors.
USB 2.0 USB 3.0
POWER SW HD AUDIO
RESET SW
HDD LED
POWER LED -
POWER LED +
Tips: - LED leads are marked positive (+) or negative (–) and must be connected to the corresponding pins on the motherboard. The orientation of the RESET SW and POWER SW connectors does not matter - Use your motherboard manual to correctly identify the front I/O connectors.
Chapter 5
46
MORPHEUS
READY, SETUP, GO
Power Supply Installation Morpheus is designed for quick PSU installation, simply put in place and tighten screws to the back panel. 1
Slide the PSU into position
Chapter 5
2
Tighten screws
47
MORPHEUS
READY, SETUP, GO
SSD / HDD Installation Morpheus is designed with tool-less 3.5” (convertible to 2.5”) and 2.5” drive bays. 1
Remove the tool-less bracket, attach the HDD into it
Chapter 5
2
Place the bracket with the drive in its original position.
48
MORPHEUS
READY, SETUP, GO
Fan Installation - Front, top, bottom Morpheus is designed to provide superb cooling with the two included 120.0 mm fans. Optionally, two 140.0 mm fans or a single 200.0 mm fan can be installed instead (not included). 1
Attach the 120.0 mm or 140.0 mm fan to the fan bracket and secure it to Morpheus
Chapter 5
2
Attach the 200.0 mm fan to the front panel
49
MORPHEUS
READY, SETUP, GO
Attaching the Case Fan Cables Morpheus comes with RGB controls directly on the I/O. Simply connect the cables to an RGB controller and use a SATA cable to power up the controller.
Tips: - The RGB controller supports additional Quiet Storm RGB FAN - It is recommended to use Quiet Storm RGB fans with the RGB controller. - Please note that the included 80.0 mm fan is not RGB and should not be connected to the RGB controller.
Note: connecting a NON-RGB RIOTORO FAN will potentially set the RGB lightning out of sync, connect any non RGB fan or third party fan to the motherboard fan headers if needed.
Chapter 5
50
MORPHEUS
READY, SETUP, GO
Water Cooling Installation - 120.0 mm or 140.0 mm options Morpheus is designed to provide superb fan cooling with two options, use a 120.0 mm or a 240.0 mm radiator in the front, top or bottom. 1
Remove the dust filters, attach the 120.0 mm radiator to the front, top or bottom.
2
Remove the dust filters, attach the 140.0 mm radiator to the front, top or bottom.
Note: top installation is only possible with ITX motherboards
Chapter 5
51
MORPHEUS
READY, SETUP, GO
GPU Installation In the mid tower configuration Morpheus allows for the installation of up to four (4) GPUs. 1
Remove the thumb screws and PCIe expansion covers/
Chapter 5
2
Attach each GPU to the motherboard, place and tighten the thumbs screws.
52
6 Everything else
www.riotoro.com/Morpheus
MORPHEUS
EVERYTHING ELSE
General Maintenace If you need to clean your gaming computer by doing more than wiping it down with a clean cloth, follow these instructions: - Complete power down of your machine, display and peripherals. - Disconnect all the power cables from the electrical outlet power strip. - Disconnect all peripherals from the machine. - Clean the machine with a soft, lint-free paper or cloth damped with mild soap and water.
Note: Do not spray liquid directly onto the case, liquid could drip inside it and cause electrical shock.
Chapter 6
54
MORPHEUS
EVERYTHING ELSE
Important Safety Information In order to achieve maximum safety while using your Morpheus convertible case, we suggest that you adopt the following guidelines: - Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the RIOTORO hotline or go to www.riotoro.com for support. Do not attempt to service or fix the device yourself at any time. - Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads. - Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and switch off the device and let the temperature stabilize to an optimal level. Operational Safety: Research has shown that long periods of repetitive motion, improper positioning of your computer peripherals, incorrect body position, and poor habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. Below are some guidelines to avoid injury and ensure optimum comfort while using your Morpheus convertible case. - Position: your keyboard, mouse and monitor need to be placed directly in front of you. Place your elbows next to your side, not too far away and your mouse within easy reach. - Height: Adjust the your chair and table so that the keyboard and mouse are at or below elbow height. - Support: Keep your feet well supported, posture straight and your shoulders relaxed. - Operation: relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods. Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming. - Customization: personalize your keyboard to suit your style of gaming in order to minimize repetitive or awkward motions while gaming. - Activity: Ensure that you et up, step away from your desk and do exercises to stretch your arms, shoulders, neck and legs; do not sit in the same position all day. - Safety: If you should experience any physical discomfort while using your Keyboard, such as pain, numbness,or tingling in your hands, wrists, elbows, shoulders, neck or back, please consult a qualified medical doctor vimmediately.
Chapter 6
55
MORPHEUS
EVERYTHING ELSE
LIMITED PRODUCT WARRANTY ("Limited Warranty") Limited Warranty. RIOTORO warrants the Product to be free from defects in materials and workmanship when used normally in accordance with the official documentation for the applicable Warranty Period from the date of retail purchase. Exclusions and Limitations. This Limited Warranty does not cover: - Software, including (without limitation) software added to the RIOTORO-branded hardware products or third-party software; - Non-RIOTORO branded products and accessories, even if packaged and sold with the Product; - Problems with and/or damage to the Product caused by using accessories, parts, or components not made by RIOTORO; - Damage caused by service (including upgrades and expansions) performed by anyone who is not officially acting as an employee, representative or sub-contractor of RIOTORO; - Claims arising from any unacceptable use or care of the Product; - Claims arising from external causes, including (without limitation), accidents, acts of God, liquid contact, fire or earthquake; - Products with a serial number or date stamp that has been altered, obliterated or removed; - Cosmetic damage, minor cosmetic abnormalities (including minor pixel abnormalities) and normal wear and tear, including (without limitation) scratches, dents and chips. For the latest and current terms of the Limited Product Warranty, please visit www.riotoro.com/warranty.
Chapter 5
56
© 2019 RIOTORO Inc. All rights reserved. RIOTORO, the RIOTORO logo, Morpheus logo and GPX100 are trademarks of RIOTORO Inc., Registered in the U.S. and other countries. All other trademarks are the property of their respectiveowners. Product may vary slightly from those pictured.
Technical Support and Customer Service US & Canada 1-888- 270-7090
[email protected] [email protected] [email protected] © Copyright 2019 RIOTORO. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or part without written permission is prohibited.
www.riotoro.com/Morpheus