MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement

MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement Prereq for upper case.

Escrito por: Walter Galan

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 6

MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement

INTRODUCCIÓN Prereq for upper case.

HERRAMIENTAS: T8 Torx Screwdriver (1) Tweezers (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 6

MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement

Paso 1 — Display Assembly



Use a pair of tweezers to lift the rubber hinge covers up off the right and left display hinges.

Paso 2



Remove the 3.2 mm T5 Torx screws (one on each side) securing the aluminum hinge brackets to the upper case.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 6

MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement

Paso 3



Use a pair of tweezers to lift aluminum hinge brackets off the right and left display hinges.

Paso 4



Remove the four inner 5.3 mm T8 Torx screws (two on each side) securing the display to the upper case.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 4 de 6

MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement

Paso 5

 Open the MacBook Pro approximately 110 degrees, and place it sideways on the table, as shown. 

While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the lower display bracket.

 Be sure to hold the display and upper case together with your left hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component. 

Remove the last remaining T8 Torx screw securing the display to the upper case.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 5 de 6

MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement

Paso 6



Grip both halves of the device, one in each hand.



Gently push forward on the bottom half of the device to detach it from the display assembly.



Carefully set each component aside, making sure to set down the lower half keyboard-side down.

To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2018-09-09 07:33:19 AM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 6 de 6