iPad 4 Wi-Fi Headphone Jack Cable Replacement
iPad 4 Wi-Fi Headphone Jack Cable Replacement Internal prereq.
Escrito por: Walter Galan
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 1 de 4
iPad 4 Wi-Fi Headphone Jack Cable Replacement
INTRODUCCIÓN Internal prereq.
HERRAMIENTAS: Tweezers (1) Spudger (1)
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 2 de 4
iPad 4 Wi-Fi Headphone Jack Cable Replacement
Paso 1 — Headphone Jack Cable
Use tweezers to peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.
Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.
Paso 2
Slide the flat end of a spudger underneath the headphone jack assembly cable, releasing the adhesive securing it to the rear aluminum frame.
Pull the headphone jack assembly cable straight out of its socket on the logic board.
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 3 de 4
iPad 4 Wi-Fi Headphone Jack Cable Replacement
To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2018-09-08 04:13:02 AM .
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 4 de 4