Installation Guide Window Air Conditioner
THANK YOU FOR YOUR PURCHASE !
QUICK SETUP GUIDE 1
Secure the top mounting rail to the top of the enclosure with four short screws.
2
Top Mounting Rail
Insert the “Left” and “Right” filler panels into the top and bottom rails of the air conditioner. Top Mounting Rail
Filler panel
4a
Fasten the top mounting rail with long screws into the window sill. Fasten the “Left” and “Right”filler panel with long screws through the upper hole into the sill.
3
Bottom Rail
Filler panel
Set the AC in the window to the center. Place the unit so that the edge of the bottom track is opposite the trailing edge of the window sill.
Sash Seal
Top Mounting Rail Window Frame
Sash Lock
1/4”
Filler panel Lock frame
Window sill Window sill
4b
Set the lock frame between the bottom of the filler panel and the window sill. Fasten the long screw through the lock frame and into the sill as shown.
4C
Set the sash lock between the upper and lower window belts and secure with long screws. Use 2 long screws on each lock.
4d
Bottom Rail
5
Cut the insulation strip to fit the inside of the filler panel and completely cover it. Set the insulation strip on the “Left” and “Right” filler panels and hold for 5 seconds to fasten it. (only for E-star models) Insulation strip
Insert the sash seal between the top of the lower window sash and the glass of the upper window to prevent outside from coming into
Unit appearance may vary but installation guidelines remain the same.
PARTS GUIDE Open the carton and remove the below parts. Part Name
Quantity
1
Top Rail
1
2
User Manual
1
3
AC Unit
1
4
Filler Panels (with "Left" & "Right" remark)
2
Remote Control
1
6
Sash Lock
1
7
Battery (AAA)
2
8
Lock Frame
2
9
3/8'' Screws
4
10
1/2'' Screws
3
11
3/4'' Screws
4
12
Window Sash Seal
1
13
Foam Top Window Gasket
1
14
Insulation strip (sponge) (only for E-star models)
2
FAN ONLY
DISPLAY
FAN SPEED
ECO
AUTO MODE
SLEEP
TMER
COOL
5
Appearance
POWER
NO.
1
14 3
4 5 6 7 8 9
2
14
3
13 12
4 5 6 7 8 9
11 10
Do not drill holes in the product. Drilling holes in the product can cause the air conditioner to not function properly.
No taladre agujeros en el producto. Perforacion de agujeros en el producto pueden causarque el aire acondicionado no funcione correctamente.
Ne pas percer de trous dans le produit. Percer des trous dans le produit peut empecher le conditionneur d'air de bien fonctionner.
Any questions or concerns about your product? Before returning the product to the store, please contact TCL for specialized support with installation, maintenance, or repair.
Preguntas o preocupaciones por su producto? Antes de devolverel producto a la tienda, favor de comunicarse con TCL para soporte especializado en instalacion, mantenimiento o reparacion.
Des questions ou des préoccupations concernant votre produit? Avant de renvoyer le produit au magasin, veuillez contacter TCL pour une assistance spécialisée avec installation, maintenance ou réparation.
Contact us 1-800-825-6747 or visit www.tclusa.com
www.tclusa.com