Huawei Phone p7 Back Cover Replacement
Huawei Phone p7 Back Cover Replacement Escrito por: Sophia
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 1 de 4
Huawei Phone p7 Back Cover Replacement
HERRAMIENTAS:
PARTES:
Heat Gun (1)
Huawei Ascend P7 back cover (1)
iFixit Opening Picks set of 6 (1) Suction Handle (1)
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 2 de 4
Huawei Phone p7 Back Cover Replacement
Paso 1 — Back Cover
Heat to melt the adhesive sticker under the back cover.
Place the suction cup and pull to open a gap between the back cover and the body.And then insert into the guitar pick and slide to cut the sticker.
Attention: Be careful with the bottom side because there is the battery flex cable.
Paso 2
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 3 de 4
Huawei Phone p7 Back Cover Replacement
Paso 3
Remove the back cover.
And you can replace with the new back cover.
Paso 4
To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2017-09-04 08:19:17 AM .
© iFixit — CC BY-NC-SA
es.iFixit.com
Página 4 de 4