HTC EVO 4G Stand Replacement
HTC EVO 4G Stand Replacement How to replace the stand.
Geschrieben von: Sage Jurado
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 1 von 6
HTC EVO 4G Stand Replacement
WERKZEUGE: T5 Torx Screwdriver (1) T4 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 2 von 6
HTC EVO 4G Stand Replacement
Schritt 1 — Battery
The first step is to remove the back case of the phone preferably with a plastic opening tool.
Schritt 2
The next step is to remove the battery from the phone by carefully lifting it out with your fingers.
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 3 von 6
HTC EVO 4G Stand Replacement
Schritt 3
Set the battery aside.
you should remove the six T5 screws holding the Inner frame in place. Be careful not to loose the screws
Schritt 4 — Stand
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 4 von 6
HTC EVO 4G Stand Replacement
Schritt 5
Using the plastic opening tools again, gently pry the inner frame apart from the rest of the phone
Remove the inner frame from the rest of the phone by lifting it off
Schritt 6
© iFixit — CC BY-NC-SA
de.iFixit.com
Remove the five screws that are holding the stand in place.
Seite 5 von 6
HTC EVO 4G Stand Replacement
Schritt 7
Remove the stand from the frame by lifting it out. Clear any debis causing it to be jammed, or replace with new stand.
To reassemble your device, follow these instructions in reverse order. Dieses Dokument wurde zuletzt angelegt am 2017-10-14 01:15:09 AM.
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 6 von 6