Grohe Einhebelmischer Mischpatrone Replacement

Push little rubber block into the head, then insert hex key. Loosen screw.. Step 2. The cover is not easy to remove. Some vinegar, tapping and a bit of patience ...
870KB Größe 9 Downloads 286 Ansichten
Grohe Einhebelmischer Mischpatrone Replacement

Grohe Einhebelmischer Mischpatrone Replacement Einfacher Austausch der Mischpatrone Simple replacement of the cartridge

Written By: Claudio montefalcone

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Grohe Einhebelmischer Mischpatrone Replacement

INTRODUCTION Wenn der Wasserhahn schwergängig wird, ist die Mischpatrone auszuwechseln. Das ist einfach. Die Patrone kann durch Einlegen in Essig wieder gangbar gemacht werden If the faucet becomes hard to close, the cartridge can be replaced. The cartridge can be cleaned with vinegar

TOOLS: 4 mm hex key (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Grohe Einhebelmischer Mischpatrone Replacement

Step 1 — Mischpatrone Cartridge 

Push little rubber block into the head, then insert hex key. Loosen screw



The cover is not easy to remove. Some vinegar, tapping and a bit of patience will help. Pull it out while turning it slightly

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Grohe Einhebelmischer Mischpatrone Replacement

Step 3



Open screw-ring ant pull cartridge out

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-25 01:20:16 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4