Cambridge SoundWorks OontZ Angle Plus Rubber Casing Replacement

ID de guía: 60115 - Borrador: 2017-05-24

Cambridge SoundWorks OontZ Angle Plus Rubber Casing Replacement Replacing the soft casing covering the edges of the Cambridge SoundWorks OontZ Angle Plus.

Escrito por: Farshad Mohebban

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 3

Cambridge SoundWorks OontZ Angle Plus Rubber Casing Replacement

ID de guía: 60115 - Borrador: 2017-05-24

Paso 1 — Rubber Casing 

Remove the six screw covers from the bottom of the device.



Starting from the screw covers, remove the front and back casing of the device.

Paso 2

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 3

Cambridge SoundWorks OontZ Angle Plus Rubber Casing Replacement

ID de guía: 60115 - Borrador: 2017-05-24

Paso 3 

Carefully pull off the casing covering the ends.



Slowly remove the casing from the top of the device.

Paso 4

To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2019-08-01 07:32:32 PM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 3