Cabstone Wired Optical Mouse Teardown

Cabstone Wired Optical Mouse Teardown How to open the Cabstone Wired Optical Mouse and which parts can be found within.

Geschrieben von: raumschaum

© iFixit — CC BY-NC-SA

de.iFixit.com

Seite 1 von 4

Cabstone Wired Optical Mouse Teardown

WERKZEUGE: Phillips #00 Screwdriver (1)

© iFixit — CC BY-NC-SA

de.iFixit.com

Seite 2 von 4

Cabstone Wired Optical Mouse Teardown

Schritt 1 — Cabstone Wired Optical Mouse Teardown

 Unplug the USB cord of the mouse from your PC first! 

Remove the lower glide pads at the bottom of the mouse.



Use a screw driver to remove the screws highlighted here.

Schritt 2



Lift the cover where the screws sat and shift it backwards slightly (away from the cable). Everything else inside the mouse comes loose with this step.

© iFixit — CC BY-NC-SA

de.iFixit.com

Seite 3 von 4

Cabstone Wired Optical Mouse Teardown

Schritt 3



The electronics board contains: 

5 small buttons



one mechanical rotary encoder (of the mouse wheel)



one LED



the sensor IC Pixart PAN3101DB

To reassemble your device, follow these instructions in reverse order. Dieses Dokument wurde zuletzt angelegt am 2017-09-12 03:28:46 AM.

© iFixit — CC BY-NC-SA

de.iFixit.com

Seite 4 von 4