Universal Thermostat Guards Installation Guide INSTALLATION INSTRUCTIONS
INSTALLATION 1. 2. 3.
Mount guard base over existing thermostat or use optional guard wallplate (see Fig. 1 and Fig. 2). Mount guard cover and lock guard. Apply nameplate (select models) to guard cover. WALL GUARD WALLPLATE (OPTIONAL) SUBBASE
UP
THERMOSTAT
MOUNTING HOLES (4)
GUARD BASE MOUNTING SCREWS (4) GUARD COVER M27089
Fig. 1. Mount guard and thermostat to wall.
HORIZONTAL OUTLET BOX GUARD WALLPLATE
UP
SUBBASE
WALLPLATE POSTS
MOUNTING SCREWS (2)
GUARD BASE SECURING SCREWS (4)
THERMOSTAT GUARD COVER M27090
Fig. 2. Mount guard wallplate with guard base and thermostat on junction box.
69-2082EFS-03
Guide d'installation des couvrethermostats universels NOTICE D'INSTALLATION
INSTALLATION 1. 2. 3.
Monter le boîtier du couvre-thermostat sur le thermostat existant ou utiliser la plaque murale facultative du couvre-thermostat (voir Fig. 1 et Fig. 2). Monter le couvre-thermostat et le verrouiller en place. Poser la plaque signalétique sur le couvre-thermostat (certains modèles seulement). MUR PLAQUE MURALE DU COUVRE-THERMOSTAT (FACULTATIVE) UP
PLAQUE DE MONTAGE THERMOSTAT
TROUS DE MONTAGE (4)
BASE DU COUVRE-THERMOSTAT VIS DE MONTAGE (4) COUVERCLE DE PROTECTION MF27089
Fig. 1. Montage du couvre-thermostat et du thermostat au mur.
BOÎTE DE SORTIE HORIZONTALE
UP
PLAQUE MURALE DU COUVRE-THERMOSTAT
PLAQUE DE MONTAGE
TIGES DE LA PLAQUE MURALE
VIS DE MONTAGE (2)
BASE DU COUVRE-THERMOSTAT VIS DE FIXATION (4)
THERMOSTAT COUVERCLE DE PROTECTION MF27090
Fig. 2. Montage de la plaque murale du couvre-thermostat, de la base du couvre-thermostat et du thermostat sur une boîte de jonction. 69-2082EFS—03
2
Protectores universales para termostatos Guía de instalación INSTRUCCIONES DE INSTALACIÓN
INSTALACIÓN 1. 2. 3.
Monte la base del protector sobre el termostato actual o utilice la placa opcional de pared para el protector (ver Fig. 1 y Fig. 2). Monte la cubierta del protector y tranque el protector. Coloque la placa de identificación (modelos seleccionados) en la cubierta del protector. PARED PLACA DE PARED PARA EL PROTECTOR (OPCIONAL) SUBBASE
UP
TERMOSTATO
AGUJEROS DE MONTAJE (4)
BASE DEL PROTECTOR TORNILLOS DE MONTAJE (4) PROTECTOR MS27089
Fig. 1. Monte el protector y el termostato en la pared.
CAJETÍN HORIZONTAL
UP
PLACA DE PARED PARA EL PROTECTOR
SUBBASE
POSTES DE LA PLACA DE PARED
TORNILLOS DE MONTAJE (2) BASE DEL PROTECTOR TORNILLOS DE FIJACIÓN (4)
TERMOSTATO PROTECTOR MS27090
Fig. 2. Monte la placa de pared para el protector con la base del protector y el termostato en la caja de conexiones. 3
69-2082EFS—03
UNIVERSAL THERMOSTAT GUARDS INSTALLATION GUIDE
Automation and Control Solutions Honeywell International Inc.
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North
35 Dynamic Drive
Golden Valley, MN 55422
Toronto, Ontario M1V 4Z9
customer.honeywell.com ® U.S. Registered Trademark © 2007 Honeywell International Inc. 69-2082EFS—03 M.S. Rev. 10-07